THAISUN Floor Plank, Hollow Pattern, Groove-Grain Pattern WPC ( Luxury), 14.5 x 240 x 2.2 cm, Lapach

• Wooden pattern flooring can be installed both inside and outside.
• Made from a mixture of thermoplastic (Wood Plastic Composite) is an artificial wood that is a mixture of HDPE and hardwood powder.
• Environmentally friendly materials Free from asbestos little moisture absorption Resulting in a low rate of shrinkage of the wood.
• Technology that mixes color into the wood from the production process Makes the paint adhere tightly to the wood.
• The wood pattern is beautiful and eye-catching. The surface feels like natural wood grain. No need to paint the wood.
• Resistant to sun, rain, resistant to all weather conditions. Eliminate termite problems
• Easy to install with specially designed fastening equipment. Can't see any clips or knots between the seams. Save time and labor
• Can be used in the poolside area. Helps prevent slipping well. and resistant to all types of stains, such as wine stains and various water stains
• Can support weight up to 270 kilograms/sq m.
• Usage volume: 1 sq m. uses 3 pieces of wood.
• Length 240 cm.
• Size (width x thickness) 14.5 x 2.2 cm.
• lapacho color

How to install

• Installed on concrete floor The slope is adjusted to 0.3-0.4 degrees only to allow water to flow through. And there is a drainage channel to prevent flooding.
• Place the Taisan joists at a distance of 30 cm. and secure the joists with self-tapping screws. By embedding anchors in the concrete at every 40 cm distance.
• Place the first Thaison floor plank from one side. and fasten the screws beside the outer plate to the joist. With a distance of 5 cm from the wall.
• Place the first row of floor joists and the second row with a 3 mm distance between the planks and continue until the end of the first row.
• insert plastic clip to the side of the first row of planks on the inside and secure with clip set screws.
• Place the second row of Taichan flooring boards. and push the wooden plate onto the clips of the first row Each row must be placed in alternating half-timbers in a brick pattern.
• Last row, if the size doesn't fit the space, cut it to fit and then use wood to cover the edges and cover the sides for beauty.

Additional suggestions

• By the nature of the wood Colors of each lot may vary by 3-5%.
• You should measure and determine the appropriate distance before installation.
• Avoid cutting or scratching with hard or sharp objects.
• Avoid wiping with harsh detergents or chemicals. Because it may damage the product surface.
• Do not modify, modify, or misuse. Wrong method of use of the product

note

• The selling price does not include the cost of installation and lifting of the product. (As for the cost of installation and lifting of the product, please contact the after-sales service department, contact number 1308)
• The color of the product shown on the website There may be differences from the color display settings of each screen.