Vent ceiling Smooth Classic TPI Size 60 x 120 x 0.4 CM. Uncolor

• TPI ventilation sheets, smooth surface characteristics Suitable for installation as external ceiling.
• Made from high quality Portland cement. Combined with natural cellulose fibers Free from asbestos Environmentally friendly.
• Through the production process with modern Autoclave technology.
• Special features, lightweight, firm, durable and durable in all weather conditions.
• Endure moisture Prevent heat and fire. Safe from termites and moths.
• Grade A1 fire resistant materials can resist fire for up to 2 hours.
• There is a vent that helps reduce heat into the house. Make the air ventilated.
• Easy to install, both drilling And hammered
• Sheet size (A x) 60 x 120 cm.
• Thickness 0.4 cm
• Natural color

Technical information

• Physical properties
  • Incitement of thickness: testing +/- 8%: ASTM C1185 Reference Standards
  • Density: Testing 1,300 +/- 50 Kg./CU.M.: Reference standard ASTM C1185
  • Water absorption: Test Max.35%: Reference Standard ASTM C1185
  • Moisture quantity: Testing & LT; 15%: ASTM C1185 Reference Standards PASS: ASTM D3272 Reference Standards
  • Acidicity: Testing 7-8: ISO 10390: 2005 Reference Standards
  • Leakage Resistance: Pass test: Standard Reference ASTM C1185
• Mechanical Features
  • Drying resistance (average 2 types): Testing & GT ; 10 (EMC) MPA: Reference Standard ASTM C1185
  • Mordulus Long Tine: Testing & GT 5,000 (EMC) MPA: ASTM C1185 Reference Standards
  • Resistant to the bending force at the wetness ( Average 2 genres): testing & gt; 7 (Wet) MPA: Reference Standard ASTM C1185
  • Mordulus Long flexible: Testing & GT; 4,000 (EMC) MPA: ASTM reference standards C1185
• Fire resistance features
  • No ignition: test work PASS: Reference Standard BS476 Part 5 Li>
  • Non -Fire Index: Testing Pass: Reference Standard BS476 Part 6
  • Surface non -fire non -fire: Pass test: BS476 Part 7 Reference Standard
• Durability Properties
  • Heat/Rain Resistance: Pass test: ASTM C1185 Reference Standards
  • Warm Water Resistance: test test: Reference Standard ASTM C1185
  • Freeze/Thai Resistance: Pass test: ASTM C1185
  • Soak/Dry Resistance: test: Standard Reference BS En 12467: 2000

Additional recommendations

• Cutting or drilling Should be done in a convenient ventilated place And wear protective equipment such as glasses or dust masks To prevent dust in the eyes and nose.
• If dust or scrap materials into the eyes To wash out with clean water many times and then quickly consult a doctor.
• In the case of moving Should lift the sheets on both sides horizontally And always perpendicular. And should use a width of 1.5 x 3 inches in size to support the board.
• The board with a thickness of 4 mm can be over 200 sheets and a 6 mm thick board. Not more than 130 sheets.

Note

• The price is not included. (In terms of product lifting Please contact the after -sales service department. Contact number 1308)
• The color of the product shown on the website. There may be different from the color display settings of each screen.