Beger Epoxy DuraGuard BEGER BE-7035 Size 1 GL. Grey

• 2 parts of the Epoxy Type for the building.
• Ultra Premium shiny film High efficiency.
• For work that needs thick film 50 microns
• Resistant to scratches. Resistant to cough, cough, chemical resistant and well -resistant to corrosion.
• The highest cleanliness technology with silver ion charges (Silver Ion) special properties to destroy bacteria and viruses that touch the skin film. By destroying DNA within the cells of various germs Which is different from antibacteria in general colors that only inhibit the breeding of bacteria Providing long protection throughout the lifetime of the color film Even if it is to be cleaned regularly.
• Suitable for areas that require high cleanliness, such as hospitals, food factory, laboratory, cafeteria, etc.
• Suitable for medium to severe industrial conditions.
• Applied area: 42 sq.m./Gallon/travel
• Usable space: suitable for all kinds of metal surfaces and concrete
• Size 1 gallon
• gray

How to use

1. Surface preparation

• 1.1 For steel without coating Use a mechanical tool to clean up the ST 2, without rust (ISO 8501-1: 2007). Good surface preparation. (Sand splash at the SA 2 1/2 level) will result in higher efficiency.
• 1.2 For steel with foundation coating The foundation surface and the primer's primer must be dry and damaged.
• 1.3 For surfaces with coating The original color system is not damaged, clean and dry. For the repair work, spray water with high pressure at the WJ3 (Naceno.5/SSPC-SP 12) level or scrub with a mechanical tool to be cleaned at the ST 2 level. Rusty areas
• 1.4 For oily metal surfaces, such as stainless steel, vaults, aluminum, zinc scrubs with sandpaper to adjust the surface and increase adhesion. Then clean the surface without stains, fat, fat and dirt.
• 1.5 For the exterior of the steel tank or steel frame or building structure By means of sandblasting to the SA2.5 size in accordance with ISO8501-1 standards or mechanical tools to meet the ST2 size according to ISO8501-1 standards.
• 1.6 For industrial pipes by sandblasting methods to the SA2.5 size in accordance with ISO8501-1
• 1.7 For the concrete surface, it must be polished, rough, or washed to clean the surface with a solution, acid, hydrochloric salt, which is 10% concentrated and then rinse with water or sprayed with high pressure (about 150 bars) to get rid of things. Dirty

2. Foundation system

• 2.1 For all kinds of metal surfaces, Bayer Steel Card 1-2 layers of rust-proof foundation
• 2.2 For cement surfaces and concrete, Bayer, Sealer Clear foundation For cement and concrete foundation.
• 2.3 For cement and concrete surfaces, polished, Bayer, SEA, Penetrate Sealer Clear foundation For cement and concrete foundation Especially the polished concrete surface.

3. Touring system

• 3.1 For the interior of the building, painted on the top with epoxy. 1-2 layers of Bayer Dura Card for the case of high film thickness Painted with Bayer Dura Card HB.
• 3.2 For the exterior wall work, painted on the front of the front with 1-2 layers of Epoxy Bayer.