Skim Coat 123 BESBOND GBS002AM00O Size 5 KG. White

• ready to use acrylic For thin plastering on concrete or plaster surfaces, thin 0.3-4 mm.
• Suitable for plastering work on ceilings and walls. It can be used both outside and inside. To cover up and fix surface defects such as air bubbles, cracks, sesame cracks, sand-blasted seams on general plaster walls.
• Good adhesion, easy to plaster, fast drying, easy to scrub, able to apply in many layers without cracking and flaking problems
• After plastering, a smooth surface is obtained. Can be left bare or painted over which can be painted with a primer or not
• Good adhesion, easy to polish and decorate
• Smooth surface
• Mixed with anti-black mold
• Easy to use, smooth cymbals
• It can be used both outside and inside.
• Package size 5 kg.
• white

Usage

• Clean the surface area to be plastered clean, free from dust, oil stains, and various dirt.
• Direct use, no need to mix with water or other chemicals.
• Plaster with a trowel on the prepared surface. If the surface is porous or very rough, 2-3 layers should be plastered, each layer thin.
• Plastering each layer, leave a period of approximately 2 hours or until the first layer dries.
• If plastering is not smooth You can use sandpaper to polish and decorate.
• Topcoating in case of cement walls should be done after allowing the surface to dry for at least 1-2 days.

Note: The color of the product shown on the website may differ from the color display setting of each individual screen.