Acrylic Waterproofing BESBOND Size 4 kg Grey

• Made from acrylic Used for roofing Good leakage.
• Helps to reflect the heat. 95%
• More than 5 times more flexible or 500%
• Resistant to polishing
• Good adhesion, not easy to slip.
• Resistant to ultraviolet light UV
• There is a companion of mold
• resistant to all weather conditions. And can be painted.
• Size 4 kg
• gray

surface preparation

1. The area or area to be coated should be clean and free of dust, grease or other matter that will affect the adhesion. Repair and fill the hole with suitable materials first.
2. to increase the efficiency of adhesion Should apply a primer first, such as a cement primer or a steel primer, depending on the coated surface.

Usage

• Can be used directly without dilution If dilution is necessary, use clean water as the diluent.
• waterproof acrylic coating By applying with a brush or roller about 3-4 layers, each layer drying before applying the next layer.
• Allow it to dry completely and become strong at approximately 7 days before use, depending on the thickness and ambient conditions.

Usage rate: 1 kg/sq.m. at thickness 0.5-0.7 mm.

Additional recommendations

• Should not work in the sun hot surface The optimum temperature is 5 °C - 40 °C.
• Rinse the instrument with water after each use.
• Should be kept out of the reach of children.

Note: The color of the product shown on the website There may be differences from the color display settings of each screen.