-20%
BEGER Acrylic Waterproof (Roofseal Cool PU Hybrid 207) 4 Kg., Grey Color
BEGER acrylic waterproofing, Roof Seal Cool PU Hybrid model, is the ultimate in roof waterproofing that is a perfect combination of acrylic and polyurethane. Provides better performance than general waterproofing. For preventing and fixing leaks on rooftops and roofs. Helps prevent and seal cracks. Can be 100% waterproof, has 600% high flexibility and provides durability for more than 7 years. It can also reflect heat up to 96.3%. Can be used for waterproofing rooftops, roofs, metal sheets, balconies, Walls, gutters and waterproofing repairs Can withstand standing water for up to 60 days.
SKU : 60392827
Product Position :
Row203AShelf009
฿788 /EACH
Original 990.00
788 /EACH
You will receive ≈ points
Wishlist
Compare
Check stock at store
About the Product
Product Details
- Waterproof acrylic Highly flexible type, water-based formula, ready-mixed, ready to use.
- Provides high adhesion strength to the surface, does not crack, does not blister, does not peel, and prevents water from penetrating 100%.
- Comes with innovative ceramic cooling Same as in Beyer Cool house paint.
- Acts as a heat insulator Can reflect 96.3% of solar heat.
- It is more flexible than 6 times or more than 600%.
- Prevents leakage and resists standing water very well for more than 60 days.
- Resistant to weather conditions and sunlight Provides more than 7 years of use
- Resistant to being trampled You can walk and step on the film layer.
- Easy to use by rolling or applying with a brush. Easy to clean
- The product has been certified by TIS standards. and environmentally friendly
- Suitable for rooftop areas tile roof Metal sheet roof, walls, cement floor, balcony and drainage pipes
- Packaging size 4 kg.
- Color: grey
Technical information
- Color film type: semi-gloss, semi-matte
- Amount of use: approximately 1 kg per square meter (per application of 1 layer of foundation and 2 layers of topcoat), resulting in a thickness of 350 - 400 microns (0.35 - 0.40 mm.)
- Drying time (at 25 degrees Celsius)
- Drying time before overcoating: 2 - 4 hours.
- Usable drying time: 12 hours
Steps for using the product
- Step 1 : Surface preparation
- The surface to be applied with Beyer Roof Seal Cool must be dry and clean. Free from dust and dirt stains
- Areas with mold and algae should be scrubbed and cleaned as well. Beyer Mold Free Fungus and Algae Killer, then let it dry and then apply Beyer Roof Seal Cool.
- In the case where the surface was originally painted or there is waterproofing material that has deteriorated, scrape and remove it completely.
- Step 2 : Applying foundation
- Mix Beyer Roof Seal Cool with clean water in a ratio of 3:1. Apply as a foundation layer and leave to dry for 2 - 3 hours (in case of needing to strengthen Enhance the adhesion of the surface Recommended to cover with Beyer Fiber Mesh)
- Step 3 : Painting the topcoat
- Apply or roll Beyer Roof Seal Cool (no need to mix with water) 1st layer, leave to dry for 2 - 3 hours.
- Apply or roll Beyer Roof Seal Cool (no need to mix with water) on the second layer. Leave the paint film dry for at least 12 hours before use.
Note: Product colors shown on the website There may be differences from the color display settings of each screen.
Product Specifications
Size for Delivery
Product Size (cm)
(W)36 x (L)36 x (H)20
Weight (kg)
17
How do you find the product information?
Related Products