New Concrete Primer NIPPON QUICK SEALER Size 2.5 Gallon White

• New plaster foundation Oil formulas
• Can be found in various cement surfaces, fresh cement, new cement and old cement.
• Good humidity. For new walls, humidity is not over. 40%
• Quick Lock penetrates, porous, lock, tight color, not peeling. > Quick Coat Titanium, high grade, completely drowned in 1 trip.
• End the job quickly, do not have to wait for the cement to dry up to 28 days.
• Can be applied in the plaster Get 7 - 10 days
• The area of ??application 30-40 square meters/gallon/trip (Depending on the condition and type of the surface)
• has a better ending ability than lumps that use general moisture resistant colors.
• For interior walls and outside the building
• Size 2.5 Gallon
• White

How to use

• Color preparation: People Good color Can be used immediately If necessary, can be mixed with no more than 3% by weight
• General surface preparation
  • The surface must be clean and dry completely. Dust-free.
  • The amount of humidity is not more than 6% by the HI-520 KETT machine and the moisture is not over. 14%by the protimeter mini; Alkaline value is not exceeding 8
• New cement surface
  • General case Should leave the cement to dry at least 28 days before the painting foundation.
  • In the case of accelerating work Suggest to measure the moisture to get the same value as the above values ??before painting.
• Old cement surfaces
  • Scrub the film. The original color that deteriorated Dust from the wall and dirt out. Or as much as possible (Should not be used for wire) for the efficiency of insertion Absorbed in the color of the coat.
  • The area that has a lichere belief must be washed and cleaned with the eliminated Nippon Paint Venini Biotene 1-2 days.

Note : The color of the product shown on the website There may be different from the color display settings of each screen