Wood Stain Aqua Gloss WOODTECT AG-101 Size 1 GL Burmese Teak

• WoodTEC shadowwood dye, no need to paint foundation Suitable for external and internal wood work.
• Prevent UV rays to protect fading colors. Extend the life of the color for a long time.
• Dry quickly. Can be applied within 2 hours.
• Increase adhesion Expanding and shrinking according to the wood well.
• Resistant to the sun, resistant to rain, resistance Good waterproof.
• Innovative Hybrid Nano, translucent color Nano small particles See clear wood Deep coloring texture.
• Protect the color, peeling, fungal, ants and insect bites.
• Easy to repair. Providing natural colors similar to real wood.
• Do not mix the mercury, lead without a pungent odor from evaporative substances and thinner
• The smell does not disturb the residents. Environmentally friendly and health.
• Received TISI. 1512-2011 The first wood dye in the country.
• Received European standards. Dangerous metal en 71 European Standard
• Size 1 gallon
• Shadow tattoo

Technical information P>

• Type: Water formula
• Covers around the area: 50 sqm./Group/Tourism
• Type: Light brush, sprayer
• Dry skin: 10-20 minutes
• Dry can be applied: 2 hours
• Packing size: 1 liter
UL>

How to paint Wood Tech Aquaruda (Water Formula)

1. Preparation of wood surfaces to be smooth Clean, free from dust, stains and must be completely dry.
   • New wood : Polished with sandpaper number 80 - 100 along the length of the wood. Until without a wood burr that was lifted up Poor dressed in hole or nail head with Wood Tech Woodfiller and wipe the rubber with Wood Tech oil WT-400 or Tinner for a particularly Leave completely dry.
   • Old wood : Polished and copied all the original colors. Wash and clean completely.
2. People are well combined before use. And people from time to time To keep the color well combined.
3. Try to apply on the wood To test the color as needed before acting.
4. For real application Use 5 - 10% clean water for the first trip. And do not need to mix water in the next trip Applied according to the wood and back one by one with a soft brush, dipped in a damp and should not be applied back and forth several times. Because when the color is dry, it will make the color look solid, do not see wood grain.
5. Leave each trip to dry at least 2 hours before applying on the next trip (The dry rate depends on the weather, moisture, porosity of the wood and the type of wood come To increase the adhesion.
6. Normally, apply within 2 trips. Outside, apply 3 trips to make the color film the most effective. Let the wood spit out the best moisture and get a beautiful color, not overlapping. With any vanish oil or painted flour, because it will block the absorption of wood dye into the wood. West And keep away from the sun.
7. Should not be applied while the weather and wood have high humidity, such as before or after the rain. (After the rain should leave the wood to spit the moisture at least 2-3 days)
8. In the case of wanting to paint all kinds of clear To keep the wood the original color naturally Should travel to 1-2 with wood dyes that have similar shades to the natural wood color first Such as AG-101 Shadow wood color (for teak or brown wood, yellow) or as-202 Semi -shiny red wood color (for red wood or red brown wood), etc. to increase the efficiency of protection.
9. For the work area, fiber cement materials can be used Wood floor dye. Detken Decinking Coloring like natural wood. By using old cement colors to apply before 1 trip and then overlapping with Woody dye dyeing, stainless steel Another 3 trips
10. Clean the brush and equipment before the color is completely dry with clean water. Should study the details beside the can again before use.

Note : The color of the product shown on the website There may be different from the color display settings of each screen.