Decking Stain Aqua Matt WOODTECT AD-504 Size 1 GL Clear

• Wood flooring, Woodtect water formula, no need to paint foundation Suitable for external and internal wood work.
• Prevent UV rays to protect fading colors. Extend the life of the color for a long time.
• Dry quickly. Can be applied within 2 hours.
• Increase adhesion Expanding and shrinking according to the wood well.
• Resistant to the sun, resistant to rain, resistance Good waterproof.
• Innovative Hybrid Nano, translucent color Nano small particles See clear wood Deep coloring texture.
• Protect the color, peeling, fungal, ants and insect bites.
• Easy to repair. Providing natural colors similar to real wood.
• Do not mix the mercury, lead without a pungent odor from evaporative substances and thinner
• The smell does not disturb the residents. Environmentally friendly and health.
• Received TISI. 1512-2011 The first wood dye in the country.
• Received European standards. Dangerous metal en 71 European Standard
• 1 gallon
• Clear color

Technical information

• Type: Water formula
• Covers around the area: 50 sq.ml. Spray
• Dry skin: 10-20 minutes
• Dry can be applied: 2 hours
• Packing size: 1 liter

How to paint Wood Tech Aquaruda (Water Formula)

1. Preparation of wood surfaces for Smooth, clean, free from dust, stains and must be completely dry.
   • New wood : Polished with sandpaper number 80 - 100 along the line of wood. Until without a wood burr that was lifted up Cover the hole or nail head too. Wood Tech Woodfiller and wipe the rubber with Wood Tech oil WT-400 or Tinner for a particularly Leave completely dry.
   • Old wood : Polished and copied all the original colors. Wash and clean completely.
2. People are well combined before use. And people from time to time To keep the color well combined.
3. Try to apply on the wood To test the color as needed before acting.
4. For real application Use 5 - 10% clean water for the first trip. And do not need to mix water in the next trip Applied according to the wood and back one by one with a soft brush, dipped in a damp and should not be applied back and forth several times. Because when the color is dry, it will make the color look solid, do not see wood grain.
5. Leave each trip to dry at least 2 hours before applying on the next trip (The dry rate depends on the weather, moisture, porosity of the wood and the type of wood come To increase the adhesion.
6. Normally, apply within 2 trips. Outside, apply 3 trips to make the color film the most effective. Let the wood spit out the best moisture and get a beautiful color, not overlapping. With any vanish oil or painted flour, because it will block the absorption of wood dye into the wood. West And keep away from the sun.
7. Should not be applied while the weather and wood have high humidity, such as before or after the rain. (After the rain should leave the wood to spit the moisture at least 2-3 days)
8. In the case of wanting to paint all kinds of clear To keep the wood the original color naturally Should travel to 1-2 with wood dyes that have similar shades to the natural wood color first Such as AG-101 (For teak or brown wood, yellow) or as-202 (For red wood or reddish brown wood) etc. to increase the efficiency of protection.
9. For the area work, fiber cement materials can be used to dye the wood flooring Wood Tech Aqua Decor Can be painted like natural wood By using old cement colors, applied first 1 trip and then covered with 3 other dye dyeing, dyeing, teching the dyeing. With clean water Should study the details beside the can again before use.

Note : The color of the product shown on the website There may be different from the color display settings of each screen.