EXTERIOR PAINT SHEEN TOA Supershield Advance Size liter. BASE D

• 100% authentic acrylic watercolor, ultra premium grade. Made from special grade acrylic providing excellent surface adhesion.
• Suitable for decorating on plaster surfaces. smooth tiles Concrete or other similar surface Can be used both outside and inside the building.
• With a special titanium nano molecule, Ti-Pure Titanium Triple Protection, that has been coated with 3 layers of strengthening, reflects heat up to 96.7%.
• Can reflect UV and Infrared light, helping reduce the temperature inside the house by up to 5.5 degrees and saving electricity by more than 27.5%.
• Smooth color film Helps resist the adhesion of dust particles. You can wash yourself.
• Excellent adhesion Prevents paint peeling off and turning into dust.
• Prevent corrosion from toxic pollution.
• Abrasion resistant Protects against alkali and salt stains.
• Prevents mold and algae formation.
• No pungent odor, safe from toxic volatile substances (Ultra Low VOCs).
• Does not contain mercury and lead.
• Thai Green Label standards are suitable for buildings that want to pass green building standards (Green Building).
• Size 2.5 gallons
• Bass D

Technical information

• Paint type: Water-based building paint made from 100% pure acrylic.
• Color film characteristics: smooth type
• Color content by volume: 36-38%
• Color content by weight: 54-56%
• Volatile organic compound content: less than 1 gram/liter.
• Paint film thickness when wet: 100-110 microns
• Paint film thickness when dry: 35-40 microns.
• Theoretical coverage area: 33-38 square meters/gallon/trip
  
  • Note: Mixing, application, roughness and porosity of the surface. Affects the surface coverage value.
• Dry time to the touch (temperature 25-30 degrees Celsius): 30 minutes
• Dry time for overcoating (temperature 25-30 degrees Celsius): 2 hours.
• Complete drying time (temperature 25-30 degrees Celsius): 7 days

How to use

• Equipment: roller, paint brush, sprayer
• Diluent: Clean water
• Dilution
  
  • Rolling or applying : 10-15%
  • Spray : 10-20%

Surface preparation

• new cement surface
  
  • Leave the wall dry for at least 1 month.
  • Clean to be free of dust, powder, cement scraps, and wax stains.
• old cement surface
  
  • Scrub and clean all the original paint that has deteriorated. (Do not use a wire brush)
  • Areas with fungus and algae must be scrubbed with water, left to dry, then applied with TOA Microkill fungus and algae disinfectant.
  • Areas with cracks less than 1 mm in diameter and not continuously cracked Fill the putty with TOA Acrylic Filler.
  • Areas with more than 1 mm of crack circumference or continuous cracking. Fill the putty with TOA 302 Acrylic Sealant.

Additional suggestions

• Store the product in a dry place. Have good ventilation. Close the lid tightly at all times.
• Should not be stored in hot places and not exposed to direct sunlight.
• Paint work should be done in a well-ventilated area.
• Wear a mask when painting and try to avoid contact with the skin or inhalation.
• If paint spills onto the skin, wash immediately with clean water and soap.
• If the color gets into your eyes, you should immediately rinse them with clean water and see a doctor.

Note: The colors of the products displayed on the website may differ from the color display settings of each individual screen.