-20%
Interior Paint SG 9 Litre BEGER Begershield Easy Clean and Care Base A
- Excellent adhesion film.
- 99% inhibition of diseases.
- Low VOC content.
- Mild odor, inhabitable within 5 minutes.
- High resistance to abrasion, up to 300,000 rubs.
- Environmentally friendly and safe for occupants.
- Certified by global institutions.
SKU : 60386126
Product Position :
Row030BShelf007
฿1,340 /EACH
Original 1,690.00
1,340 /EACH
You will receive ≈ points
Wishlist
Compare
Check stock at store
About the Product
Product Details
- Interior paint, water-based formula, semi-gloss type, premium grade.
- Produced with advanced acrylic technology that helps create a smooth and even film structure.
- Excellent protection against deep-seated stains and dirt that may occur within the house.
- Stain Removal Technology helps effectively remove various types of stains, such as pencil marks, chalk, wood stains, ink, or condiments.
- Combined with Cross-link Technology, the paint film adheres well to the surface, making it durable and washable for over 300,000 cycles.
- Effectively inhibits more than 20 types of diseases on walls, including viruses, fungi, and various strains of bacteria, with Silver Ion Technology.
- Nearly Zero VOCs, with a mild odor, does not release harmful volatile compounds that are hazardous to living beings and the environment. Inhabitable within 5 minutes. Certified by LEED V.4.1 and WELL V.2 standards.
- Developed without hazardous chemicals such as formaldehyde, asbestos, lead, and more than 10 dangerous substances.
- The advanced Silver Ion Technology combined with the paint provides highly efficient inhibition of various disease-causing bacteria, over 99.9% effectiveness.
- K. Pneumoniae
- Candida Albicans
- E.Coli
- Coronavirus 229 E ,H1N1 , H3N2
- Pseudomonas Aeruginosa
- S.Aureus
- Hand, Foot and Mouth Disease
- Passed the Scrub Abrasion and Washability Tester test from a laboratory.
- Passed bacterial and viral testing standards from government agencies.
- Size: 9 liters
- Base A
Technical Information
- Coverage: 31-38 sq.m./gallon/coat.
- Application Tools: Brush, roller, or spray.
- Preparation before use: Dilute with clean water 5-10% by volume.
- Drying time:
- Surface dry: 30 minutes.
- Recoatable: 2-4 hours.
Surface Preparation
- For maximum long-term performance, clean the surface from dust, grease, and loose particles. Allow it to dry completely for at least 1 month and ensure a moisture level below 14%.
- Remove any chalky dust or loose particles. For damaged areas, repair the surface with Berger Acrylic Filler F-200.
- For surfaces with mold or mildew, clean and let it dry. Treat with mold-killing and algae-removing solution, Berger Mold-Free M-001, and leave it moist. Allow it to dry completely.
Priming
- For new or undamaged cement surfaces, apply Berger Acrylic Sealer Primer (Water-based) Beger Renkwick Primer B-2900, one coat.
- For weathered and heavily chalked old surfaces, apply Berger Acrylic Primer (Water-based) Beger ProQuik Primer B-1900, one coat.
- For dilution, use clean or tap water. Avoid using well or canal water.
Topcoat
- Apply the topcoat with 100% acrylic water-based paint, Berger Siladur EClean & Care, 2-3 coats (Inhabitable within 5 minutes after the paint film is dry).
Additional Recommendations
- Stir the paint thoroughly before use.
- Close the lid tightly when not in use and keep it out of children's reach, away from water sources.
- Use in suitable conditions with sufficient ventilation.
- Avoid eye contact, inhalation, and ingestion.
- Avoid direct skin contact. If contact occurs, rinse with plenty of water and soap.
- If eye contact occurs, rinse with plenty of water and seek medical attention immediately.
Note: The color of the product shown on the website may vary from the actual color due to screen color display settings.
Product Specifications
Size for Delivery
Product Size (cm)
(W)26 x (L)26 x (H)32.5
Weight (kg)
13.7
How do you find the product information?
Related Products