Interior Paint SG 9 Litre BEGER Begershield Easy Clean and Care Base D

• Interior paint, water-based formula, semi-gloss type, premium grade.
• Produced with advanced acrylic technology that helps create a smooth and even film structure.
• Excellent protection against deep-seated stains and dirt that may occur within the house.
• Stain Removal Technology helps effectively remove various types of stains, such as pencil marks, chalk, wood stains, ink, or condiments.
• Combined with Cross-link Technology, the paint film adheres well to the surface, making it durable and washable for over 300,000 cycles.
• Effectively inhibits more than 20 types of diseases on walls, including viruses, fungi, and various strains of bacteria, with Silver Ion Technology.
• Nearly Zero VOCs, with a mild odor, does not release harmful volatile compounds that are hazardous to living beings and the environment. Inhabitable within 5 minutes. Certified by LEED V.4.1 and WELL V.2 standards.
• Developed without hazardous chemicals such as formaldehyde, asbestos, lead, and more than 10 dangerous substances.
• The advanced Silver Ion Technology combined with the paint provides highly efficient inhibition of various disease-causing bacteria, over 99.9% effectiveness.
  • K. Pneumoniae
  • Candida Albicans 
  • E.Coli 
  • Coronavirus 229 E ,H1N1 , H3N2
  • Pseudomonas Aeruginosa
  • S.Aureus  
  • Hand, Foot and Mouth Disease
• Passed the Scrub Abrasion and Washability Tester test from a laboratory.
• Passed bacterial and viral testing standards from government agencies.
• Size: 9 liters
• Base D

Technical Information

• Coverage: 31-38 sq.m./gallon/coat.
• Application Tools: Brush, roller, or spray.
• Preparation before use: Dilute with clean water 5-10% by volume.
• Drying time:
  • Surface dry: 30 minutes.
  • Recoatable: 2-4 hours.

Surface Preparation

• For maximum long-term performance, clean the surface from dust, grease, and loose particles. Allow it to dry completely for at least 1 month and ensure a moisture level below 14%.
• Remove any chalky dust or loose particles. For damaged areas, repair the surface with Berger Acrylic Filler F-200.
• For surfaces with mold or mildew, clean and let it dry. Treat with mold-killing and algae-removing solution, Berger Mold-Free M-001, and leave it moist. Allow it to dry completely.

Priming

• For new or undamaged cement surfaces, apply Berger Acrylic Sealer Primer (Water-based) Beger Renkwick Primer B-2900, one coat.
• For weathered and heavily chalked old surfaces, apply Berger Acrylic Primer (Water-based) Beger ProQuik Primer B-1900, one coat.
• For dilution, use clean or tap water. Avoid using well or canal water.

Topcoat

• Apply the topcoat with 100% acrylic water-based paint, Berger Siladur EClean & Care, 2-3 coats (Inhabitable within 5 minutes after the paint film is dry).

Additional Recommendations

• Stir the paint thoroughly before use.
• Close the lid tightly when not in use and keep it out of children's reach, away from water sources.
• Use in suitable conditions with sufficient ventilation.
• Avoid eye contact, inhalation, and ingestion.
• Avoid direct skin contact. If contact occurs, rinse with plenty of water and soap.
• If eye contact occurs, rinse with plenty of water and seek medical attention immediately.

Note: The color of the product shown on the website may vary from the actual color due to screen color display settings.