Exterior Paint SG JOTUN TOUGH SHIELD MAX Size 1 GL Base A

• High quality exterior watercolor premium grade
• semi -shadow film
• contains good quality acrylic
with regular color distribution And effective drowning.
• UV protection that causes the destruction of color film Which is the cause of the fading of the color film.
• Prevent moss and fungal Make your home beautiful, free from mold and moss. style = "color: null"> Protect the wall of the house from moisture that is the cause of the lashing
Resistant to weather conditions Either sunlight or rain.
• Free from dangerous chemicals such as Apeo Formaldehyde And heavy metal substances
• Suitable for concrete and masonry walls.
can be used for both new buildings and old cement colors that have passed the slave. style = "color: null"> received the TIS standard 2321-2549
• 1 gallon capacity (3.6 liters)
• bass A

Technical information

• Type of color: Watercolor
• Shades: as specified in Catalog
• Color film characteristics: semi style = "color: null"> Equipment: Roller brush, normal sprayer Or vacuum sprayers
• color texture by volume: 37 +/- 2 %
Covering the ^*1 area span style = "color: null"> Not less than: 9.3
• not more than: 12.3

• Dry, touch (dry skin): 1 hour
Delicate of dry, hard : 6 hours
• Dry period can be applied (at least) 2 hour. style = "color: null"> Solvement: Water
Diligence: Can be used immediately after stirring together If it is necessary to mix water, not exceeding 5%

usage system
Surface preparation

• The surface must be dry. Clean, free from dust, oil stains, fat, cement and various traces must be removed. If the surface causes dirty dust or has the original color film that has come off Should be eliminated with plastic brush Or hard brush.

paint system

• foundation: jotun tour shield primer / jotashhed primer / jotun essence Old Concrete Primer 1 trip
Private color: jotun tour shield max (sg) 2 Travel

Storage

• Products need to be stored according to the requirements Should be stored in a dry place Good air Should not be stored in a hot place And not to be directly exposed to sunlight.

Additional recommendations

• The surface temperature must be higher than 10 degrees Celsius and at least 3 degrees Celsius. Be sure to have enough ventilation for dry film.

Note

• ^*1 The surface covers the thickness of the film, color, characteristics and porosity of the surface Surface defects Including temperature And the loss during use.
the color of the product shown on the website There may be different from the color display settings of each screen