INTERIOR PAINT SHEEN DULUX EASYCARE Size 9 liter BASE A #A990

• Acrylic watercolor Smooth film type. A> For applying interior walls.
• Made from high quality acrylic glue with formula. Stainard Providing high efficiency in surface coating.
• Through deep stain innovation The stains can not penetrate deep into the wall.
• Remains the beauty of the color with the Colorguard technology, adding vitality to your wall for a long time.
• Can wipe Various stains without leaving spots Even deep stains can be scrubbed.
• The color is still beautiful, bright, not peeling, larching, resistant to more than 30,000 rounds. Can resist up to 6 types of bacteria.
• Do not mix lead and mercury. And has a low evaporation amount (Low-vocs)
• Safe from the smell throughout the formula. Ammonia -free and chemicals with pungent odor 100%
• Standardized TIS. 2321-2549
• Packing size 9 liter
• Base A #A990

Technical information

• Color type: acrylic watercolor
• Color film characteristics: Smooth
• Color by volume: 38-42%
• Dry duration: at least 30 minutes
• Overlapping period: 30 minutes --2 hours
• Complete dry time: Little 7 days
• Covering the theory: 35-40 sq.m./Travel/Gallon

Surface preparation

• Before every paint The surface must be dry, clean, free from dust, cement scraps, fat stains and dirt.
• If there are no more than 1 mm cracks, repair with Porn color, look luxury acrylic filler 1040 Then scrubbing it smoothly.
• If you want to add smoothness to the surface Or repairing the problem of the concrete that has a problem To put the entire wall with see Luxe Smooth Over and then scrubbing smoothly.
• Should make sure the wall does not have water leakage. To protect the color film later.
• The new cement surface never painted. Or painted and still in good condition.
  • Leave the cement surface to dry at least 1 month after plastering. With no moisture 14%
• Old cement surfaces that deteriorate
  • should scrub the original color that has deteriorated Areas with mold or moss Use fungal and moss removal solution. See Luxe Wet Mold Wash by tinging overnight Then scrub it out with water thoroughly. Leave to dry completely.

Painting foundation

• New cement surface That has never been painted Or painted and still in good condition.
  • Painted on the interior of the lipper, see 1 trip to dry for at least 30 minutes-2 hours before making the color overlapping
  • Apply old cement foundation To strengthen the luxury seal, 1 trip, leave to dry at least 10-12 hours before painting over the top. Maximum moisture 25%
    • Painted with high-performance cement foundation, Luxewet, Cheele, Power Plus Prime, 1 trip, leave it for at least 2-4 hours before painting on the top

  Additional recommendations

  • Polishing or eliminating color film by heat May cause dust/or harmful If you can do it, you should use scrubbing methods with brush and water instead.
  • Should operate in a place that is convenient to transfer. And wear appropriate personal devices.
  • Close the lid completely. And should be kept away from the child's hand Far from water sources.
  • Do not inhale.
  • Avoid direct skin contact. If there is a part that is touched, wash with water and soap.
  • If touching the eyes, wash with a lot of water and hurry to see a doctor immediately.

  Note : The color of the product shown on the website There may be different from the color display settings of each screen.