EXTERIOR PAINT SHEEN DULUX WEATHERSHIELD HYDROFRESH Size 3 liter BASE A #A911

• ? Smooth color film type Bass A For external wall appliances
• Made from a unique acrylic glue of Du Lux With the innovation of color film coating for high efficiency in self -cleaning.
• Helps the water spread consistently all over the wall Therefore can wash away the dirt all over the wall Helps to reduce the formation of stains from rainwater.
• Helps to reduce the temperature of the exterior wall surface of 5 degrees Celsius to save energy. To cool the house.
• Suitable for modern style buildings that have a wide wall area without lotus eyebrows because rainwater will spread the wall thoroughly.
• The adhesion of color Excellent Prevents the peeling of the color film with acrylic glue Resistant to all weather conditions.
• Prevent rain Waterproof into the wall Prevents mold, alkaline and moss, reducing the adhesion of dust.
• Prevent UV light with special colored mother. Gives a long, long -lasting color.
• Do not mix lead and mercury.
• Standardized TIS. 2321-2549
• Packing size 3 liter
• Bass A #a911

Technical data

• Color type: watercolor Lick
• Color film characteristics: Smooth
• Color texture by volume: 35-40%
• Dry duration: not less than 30 minutes
• Tap: 30 minutes --2 hours
• Complete dry time: at least 7 days
• Covering the theory: 35-40 sqm. ./ Travel/Gallon

Surface preparation

• Before every paint The surface must be dry, clean, free from dust, cement scraps, fat stains and dirt.
• If there are no more than 1 mm cracks, repair with Porn color, look luxury acrylic filler 1040 Then scrubbing it smoothly.
• If you want to add smoothness to the surface Or repairing the problem of the concrete that has a problem To put the entire wall with see Luxe Smooth Over and then scrubbing smoothly.
• Should make sure the wall does not have water leakage. To protect the color film later.
• The new cement surface never painted. Or painted and still in good condition.
  • Leave the cement surface to dry at least 1 month after plastering. With no moisture 14%
• Old cement surfaces that deteriorate
  • should scrub the original color that has deteriorated Areas with mold or moss Wash with clean water. Dry and then apply with the rearring and moss. See Luxe Wet Mold Wash by tutoring overnight Then scrub it out with water thoroughly. Leave to dry completely.

Painting foundation

• New cement surface That has never been painted Or painted and still in good condition.
  • Painted acrylic cement foundation Vesh Chiel Super Prime 1 trip Leave it for at least 2 hours before making a paint.
• Old cement surfaces that deteriorate Is a dust, a chalk or a fiber cement Or the surface that uses smooth plastering materials
  • Apply old cement foundation To enhance the adhesion see Luxe Seal Amount 1 trip, leave to dry at least 10-12 hours before painting over the top. 25%
    • Painted with high efficiency formula Wet, Cheeel, Power Plus Prime. 1 Travel to dry at least 2 hours before painting over the top.
  • Painting over
    • Painted with color Wet Hydrofresh at least 2 trips, leaving the distance between the first layer and the next layer for about 30 minutes -2 hours.
  < P> Additional recommendations
  • Polishing or eliminating color film by heat May cause dust/or harmful If you can do it, you should use scrubbing methods with brush and water instead.
  • Should operate in a place that is convenient to transfer. And wear appropriate personal devices.
  • Close the lid completely. And should be kept away from the child's hand Far from water sources.
  • Do not inhale.
  • Avoid direct skin contact. If there is a part that is touched, wash with water and soap.
  • If touching the eyes, wash with a lot of water and hurry to see a doctor immediately.

  Note : The color of the product shown on the website There may be different from the color display settings of each screen.