EXTERIOR PAINT SHEEN DULUX WEATHERSHIELD HYDROFRESH Size 9 liter BASE A #A911

• Acrylic watercolor Smooth color film type Bass A For external wall appliances
• Made from a unique acrylic glue of Du Lux With the innovation of color film coating for high efficiency in self -cleaning.
• Helps the water spread consistently all over the wall Therefore can wash away the dirt all over the wall Helps to reduce the formation of stains from rainwater.
• Helps to reduce the temperature of the exterior wall surface of 5 degrees Celsius to save energy. To cool the house.
• Suitable for modern style buildings that have a wide wall area without lotus eyebrows because rainwater will spread the wall thoroughly.
• The adhesion of color Excellent Prevents the peeling of the color film with acrylic glue Resistant to all weather conditions.
• Prevent rain Waterproof into the wall Prevents mold, alkaline and moss, reducing the adhesion of dust.
• Prevent UV light with special colored mother. Gives a long, long -lasting color.
• Do not mix lead and mercury.
• Standardized TIS. 2321-2549
• Packing size 9 liter
• Base A #A911

Technical information

• Color type: acrylic watercolor
• Color film characteristics: Smooth
• Color by volume: 35-40%
• Dry duration: not less than 30 minutes
• Overlapping period: 30 minutes --2 hours
• Complete dry time: At least 7 days.
• Covering the theory: 35-40 sq.m./Travel/Gallon

Surface preparation >

• Before every paint The surface must be dry, clean, free from dust, cement scraps, fat stains and dirt.
• If there are no more than 1 mm cracks, repair with Porn color, look luxury acrylic filler 1040 Then scrubbing it smoothly.
• If you want to add smoothness to the surface Or repairing the problem of the concrete that has a problem To put the entire wall with see Luxe Smooth Over and then scrubbing smoothly.
• Should make sure the wall does not have water leakage. To protect the color film later.
• The new cement surface never painted. Or painted and still in good condition.
  • Leave the cement surface to dry at least 1 month after plastering. With no moisture 14%
• Old cement surfaces that deteriorate
  • should scrub the original color that has deteriorated Areas with mold or moss Wash with clean water. Dry and then apply it with the liquid to eliminate the rays and moss. Mold Wash by tutoring overnight Then scrub it out with water thoroughly. Leave to dry completely.

Painting foundation

• New cement surface That has never been painted Or painted and still in good condition.
  • Acrylic cement foundation Weir Shell Super Prime Amount 1 trip, dry for at least 2 hours before making the color overlapping.
• Old cement surface that deteriorates Is a dust, a chalk or a fiber cement Or the surface that uses smooth plastering materials
  • Apply old cement foundation To enhance the adhesion of see Luxe Maximine , 1 trip, leave to dry at least 10-12 hours before painting overlapping.
• Surface New cement and old cement with maximum humidity 25%
  • Painted with high efficiency formula Du Luxewisch Shell Power Plus Prime Painted on the top.
• Painting over
  • Painted with colors Wet Hydrofresh at least 2 trips, leaving the distance between the first layer and the next floor for about 30 minutes -2 hours.