Exterior Paint Sheen DULUX Weathershield Powerflex Size 9 L Base A

• Acrylic watercolor Smooth color film type Bass A For external wall appliances
• Powerflex Technology technology, 3 times the mole film, prevent cracks. Covering cracks efficiently.
• UV resistance to the temperature of the exterior wall surface 5 degrees Celsius helps save energy. Always keep the house cool.
• Prevent the adhesion of dust and soot. With technology Stay-Clean Technology
• Protects the walls from alkaline, salt well, beautiful, fresh, long -lasting, not fading.
• Prevent fungi and moss stains.
• Do not mix mercury and lead. And contains low volume of evaporation.
• Standardized TIS. 272-2549
• Packing size 9 liters
• Bass A

Technical data

• Color type: acrylic water
• Color film characteristics: Smooth
• Color texture by volume: 35-40%
• Dry duration: at least 30 minutes
• distance Overlapping time: 30 minutes-2 hours
• Complete dry time: at least 7 days
• Covering the theory: 35-40 sq.m./Tour/US Gallon

Surface preparation

• Before every paint The surface must be dry, clean, free from dust, cement scraps, fat stains and dirt.
• If there are no more than 1 mm cracks, repair with Porn color, look luxury acrylic filler 1040 Then scrubbing it smoothly.
• If you want to add smoothness to the surface Or repairing the problem of the concrete that has a problem To put the entire wall with see Luxe Smooth Over and then scrubbing smoothly.
• Should make sure the wall does not have water leakage. To protect the color film later.
• The new cement surface never painted. Or painted and still in good condition.
  • Leave the cement surface to dry at least 1 month after plastering. With no moisture 14%
• Old cement surfaces that deteriorate
  • should scrub the original color that has deteriorated Areas with mold or moss Wash with clean water. Dry and then apply with the rearring and moss. See Luxe Wet Mold Wash by tutoring overnight Then scrub it out with water thoroughly. Leave to dry completely.

Painting foundation

• New cement surface That has never been painted Or painted and still in good condition.
  • Painted with acrylic cement foundation Wet, Cheeel, Super Prime. 1 trip, dry for at least 2 hours before making the color overlapping.
• Old cement surface that deteriorates Is a dust, a chalk or a fiber cement Or the surface that uses smooth plastering materials
  • Apply old cement foundation To enhance the adhesion see Luxe Seal Amount 1 trip, leave to dry at least 10-12 hours before painting over the top. 25%
    • Painted with high efficiency formula Wet, Shell Power Plus Prime 1, leave to dry at least 2 hours before painting on the top.
  • Painting over
    • Painted with color Wet Power Flex at least 2 trips, leaving the distance between the first layer and the next floor for about 30 minutes -2 hours.

  Additional suggestions

  • Polishing or eliminating color film with heat May cause dust/or harmful If you can do it, you should use scrubbing methods with brush and water instead.
  • Should operate in a place that is convenient to transfer. And wear appropriate personal devices.
  • Close the lid completely. And should be kept away from the child's hand Far from water sources.
  • Do not inhale.
  • Avoid direct skin contact. If there is a part that is touched, wash with water and soap.
  • If touching the eyes, wash with a lot of water and hurry to see a doctor immediately.

  Note : The color of the product shown on the website There may be different from the color display settings of each screen.