-8%
Road Line Paint Reflective 3 L TOA Back #719
Reflective road paint TOA is made from acrylic resin. and high-quality chlorinated rubber used for marking traffic lines and various symbols on the edge of the road, footpath, road surface, expressway floor, and parking lot, giving a thick color film Apply and put on the film. has excellent adhesion Both on asphalt and concrete road surfaces, it can withstand environmental conditions, oil stains, grease stains, and dirt well. Suitable for both internal and external work.
SKU : 60311982
Product Position :
Row034BShelf001
฿758 /EACH
Original 827.00
758 /EACH
You will receive ≈ points
Wishlist
Compare
Check stock at store
About the Product
Product Details
- Reflective road paint TOA is suitable for both interior and exterior applications. It can be applied to all surfaces, be it asphalt or concrete.
- Used for marking traffic lines and various symbols on road edges, sidewalks, road surfaces, expressway floors, and parking lots.
- Made from acrylic resin and chlorinated rubber, high quality, mixed with plexiglass reflect light at night
- Thick film, applied over the film, provides excellent adhesion. both on asphalt road surface and concrete road surface
- Resistant to environmental conditions, oil stains, grease stains and dirty stains.
- Fresh, sharp, no stains, fast frustration
- Packing size 3 liters
- Black #719
Technical data
- Characteristics of color film: matt
- Area coverage: 25-30 sq.m./gallon/time
- Dry period
- Skin dry : 10-15 minutes
- Dry to recoat: 1 hour
- complete drying: 3 days
Surface preparation
- New texture
- Leave the surface to dry completely.
- The surface to be used must be clean, free from dust, grease, oil stains, wax, salt stains and other contaminants.
- Old surface
- The surface to be used must be clean, free from dust, grease, oil stains, wax, salt stains, old paint and other contaminants.
- chalky surface or deteriorate Obviously must be cleaned with a nylon brush.
- Surfaces with algae and fungi should be treated with TOA 113 Microkill.
- Clean the surface with water and suitable cleaners. Then rinse with clean water again. before leaving it to dry completely
- Primer paint
- polished surface case It is recommended to paint the primer with TOA Penetrating Sealer at least 1 coat and leave it to dry for 3-4 hours to increase adhesion. Before painting with TOA road paint
- Topcoat
- Apply with TOA Road Paint at least 2 coats (each coat allow at least 1 hour to dry before applying the next coat).
Additional recommendations
- Store the product in a dry place. well ventilated Close the lid tightly and tightly at all times.
- Should not be stored in a hot place and out of direct sunlight.
- Paint work should be done in a well ventilated area.
- Wear a mask when spray painting and try to avoid skin contact or inhalation.
- If the paint gets on the skin, it should be washed immediately with clean water and soap. If the color gets into your eyes, you should wash them with clean water immediately and seek medical attention.
Remark : The color of the product displayed on the website may There is a difference from the color display settings of each screen.
Product Specifications
Size for Delivery
Product Size (cm)
(W)16.5 x (L)16.5 x (H)18.5
Weight (kg)
4.99
How do you find the product information?
Related Products