GEMINI Stainless Steel Welding Wire (308L), 1.6 mm (Pack 12 Wires)

• The GEMINI Stainless Steel Welding Wire is perfect for welding thin stainless steel workpieces of AISI grades 302, 304, 304L, and 304LN.
• It provides beautiful welds without bubbles, ensuring the workpiece remains intact.
• The welds are strong, preventing the occurrence of weld defects.
• It produces minimal spatter, ensuring clean welding results.
• The wire can be used as a substitute for TIG welding and is suitable for use with welding machines.
• It is well-packaged in a ziplock bag, allowing for easy storage and reuse.
• Each pack contains 12 pieces of welding wire
• Diameter of 1.6mm.

Technical Information:

• Classification: AWS A5.4 E308L-16
• Yield Stress: 520 N/mm2
• Tensile Strength: 520 N/mm2
• Elongation (%): 40
• Carbon (%): 0.01
• Manganese (%): 0.70
• Silicon (%): 0.60
• Nickel (%): 9.50
• Chromium (%): 18.10

Additional Recommendations:

• Choose the appropriate type and size of welding wire for the job.
• Preheat damp welding wire at 200-250 degrees Celsius for 60 minutes before use.
• Remove moisture, rust, and oil from the workpiece before welding to prevent weld defects and gas porosity.
• Do not modify or alter the product or use it for purposes other than welding.
• Avoid using acidic or alkaline chemicals for cleaning.
• Store in a dry place and out of reach of children.
• Use eye protection and a mask during welding to prevent spatter.
• Weld in a well-ventilated area to avoid inhaling welding fumes.

Note: The product color displayed on the website may vary from the actual color due to different screen settings