Rain Gutter VG Primo Size 17 x 300 x 12 CM. Grey

• The vinyl gutter VG Primo model is used in conjunction with standard equipment of VG Primo products only.
• Used for collecting rainwater on the roof in order to collect water from spreading and draining into the sewer line
• Made from high-quality uPVC vinyl, strong, durable, not peeling, not rusting throughout the lifetime
• rail hook system The hook is hidden in the rain gutter. thus making it impossible to see the hooks to hang the rails
• End caps, a new system that prevents water from overflowing from rain gutters In case of insufficient drainage
• with special chemical ingredients Make VG vinyl rain gutters more flexible Not cracked in a long time
• There are 2 times UV to protect the vinyl from sunlight in Thailand up to 40+ degrees Celsius.
• Hook to hang the rail, special strong structure. Comes with a 2-layer locking system to prevent the rail from falling off.
• Quick and easy to install with the new VG assembly system that is easy to put on and fit better.
• With the "P" shape, it can be used with a roof that is longer than usual. 
• Super Cool Color technology provides longer-lasting color quality.
• Can support water 50 sqm. per low tide
• Received the results of the weather resistance test from Germany. Durable for more than 15 years
• 10 year warranty (according to manufacturer conditions)
• can accept water 105 liters/meter
• Length 300 cm.
• Size (W x H) 17 x 12 cm.
• Grey

Technical data

• Install rail hooks every 60-75 cm.
• Roof area 50-55 square meters. There must be 1 drainage point.

Installation information

• The distance between the roof and the eaves: 10 cm.
• Eaves Style: Straight beams do not require angle adjustment kit. Deformed beams should use angle adjusters. In some cases, it may be modified by omitting the hemispherical base of the miter set. because there
• will be a gap between the gutter and the eaves causing water to drip around the eaves
• Hook spacing: If the customer wants to support the weight well, hooks should be installed every 50-55 cm., should not exceed 60 cm. Install hooks 5 cm. . or as close as possible to the seam Two hooks can be
• placed on the outer and inner corners for greater strength.
• Calculation of the low tide point: calculated from the roof area. There should be at least low tide. 1 point per area 50 sq m. or 1 sloping side of the roof to have 1 point of ebb.
• Placing the water point: should be at the inner corner of the roof of the house because it is where a lot of water poured down If the customer does not want to have a water point in the corner of the house can be
• placed as close to the hip position as possible
• Sealing: Use silicone for gutters because they are more resilient than other types of seals. Use pressure sealers for pipes. Use hot glue for the miter as it dries instantly to lock in the desired angle of inclination.
• Screws should not be used as they will rust the screws and connections and will eventually fall off. In general, an outside contractor may only use pressure-sensitive adhesive for both pipes and gutters.
• Calculation of the length of the downstream pipe: the height of the building to the floor plus 1-1.5 meters in case of the oblique roof distance to the house.
• The gutter should be installed with a slope of 2 cm for every 10 m of length, with a slope of no more than 2 cm.
• Additional recommendations
• Should measure the distance clearly before installation.
• Should be installed by an expert technician and read the manual carefully
• Do not edit or modify the product. or misuse
• Do not use with non-standard equipment.

Remarks

• The selling price does not include the cost of installation and lifting of the product (as for the cost of installation and lifting of the product, please contact the after-sales department at 1308).
• The color of the product shown on the website There may be differences from the color display settings of each screen.