Rain Gutter VG Ezy Size 16 x 300 x 10.25 cm Brown

• The vinyl gutter VG Ezy model can be used in conjunction with the standard equipment of the VG Ezy product only.
• Used for collecting rainwater on the roof in order to collect water from spreading and draining into the sewer line
• Made from high-quality uPVC vinyl, strong, durable, not peeling, and not rusting throughout the lifetime
• iR-uPVC innovation absorbs sound well without leakage with 2 layers of production for the best protection
• Layer 1, the outer protective layer Specially coated with world-class colors to reduce heat and reflect UV up to 3 times.
• 2nd layer, the structural layer, is strong, durable, highly flexible, and not easily broken Helps to maintain its condition throughout use.
• Increase UV protection 3 times, good heat dissipation, resistance to the sun, resistant to rain, and resistant to the weather of Thailand.
• VG's special design Over Flow system prevents water from overflowing from the back of the rail.
• Lightweight, quick, and easy to install. Suitable for installing rain gutters on high places
• Received the results of the weather resistance test from Germany. Durable for more than 15 years
• 10-year warranty (according to manufacturer conditions)
• Length 300 cm.
• Size (W x H) 16 x 10.25 cm.
• Brown

Installation information

• The distance between the roof and the eaves: 10 cm.
• Eaves Style: Straight beams do not require angle adjustment kit. Deformed beams should use angle adjusters. In some cases, it may be modified by omitting the hemispherical base of the miter set. because there
• will be a gap between the gutter and the eaves causing water to drip around the eaves
• Hook spacing: If the customer wants to support the weight well, hooks should be installed every 50-55 cm., should not exceed 60 cm. Install hooks 5 cm. . or as close as possible to the seam Two hooks can be
• placed on the outer and inner corners for greater strength.
• Calculation of the low tide point: calculated from the roof area. There should be at least low tide. 1 point per area 50 sq m. or 1 sloping side of the roof to have 1 point of ebb.
• Placing the water point: should be at the inner corner of the roof of the house because it is where a lot of water poured down If the customer does not want to have a water point in the corner of the house can be
• placed as close to the hip position as possible
• Sealing: Use silicone for gutters because they are more resilient than other types of seals. Use pressure sealers for pipes. Use hot glue for the miter as it dries instantly to lock in the desired angle of inclination.
• Screws should not be used as they will rust the screws and connections and will eventually fall off. In general, an outside contractor may only use pressure-sensitive adhesive for both pipes and gutters.
• Calculation of the length of the downstream pipe: the height of the building to the floor plus 1-1.5 meters in case of the oblique roof distance to the house.
• The gutter should be installed with a slope of 2 cm for every 10 m of length, with a slope of no more than 2 cm.

Recommendations

• Should measure the distance clearly before installation.
• Should be installed by an expert technician and read the manual carefully
• Do not edit or modify the product. or misuse
• Do not use non-standard equipment.

Remarks

• The selling price does not include the cost of installation and lifting of the product (as for the cost of installation and lifting of the product, please contact the after-sales department at 1308).
• The color of the product shown on the website There may be differences from the color display settings of each screen.