Wood Guard WOODTECT Hybrid Primer Size 1 Gallon Clear WW-5000

Technical information

• type of color film: clear color (xoline formula)
Operation/Gallon/Tourism: 25-30 sq.m.
• Number of trips: 1 trip
• Diligence: Can be used immediately if it is a hardwood, mix 20% with the WT-500 or 2951 (do not mix with pine oil)
• Dry touch: 5-10 minutes. style = "font-size 20px"> Dry: 15-20 minutes

How to use

surface preparation

• New surface and old surface That needs to be applied, must dry, clean, free from fat stains. dust (The surface moisture must not exceed 14%)
Old color film that is dust or peeling Must scrub the old or peel off all the wood. style = "font-size 20px"> If the surface has fungal Eliminate all the fungus. Then rinse with clean water Leaving completely dry (The surface moisture must not exceed 14%) rubbed sandpaper to smooth the skin Clean thoroughly without dust to apply the floor.
• style = "font-size 20px"> when preparing the surface well Will increase the adhesion to the film over the top And get the highest color efficiency.

Steps

1. After preparing the surface and the surface is clean, dry, without dustless fat stains. style = "font-size 20px"> for Wood Tech people Hybrid-Primer WW-5000 well, both before and during the application. (If the wood is hard, mix 20% with the WT-500 or Tinner 9951) (do not mix with the oil is absolutely). style = "font-size 20px"> Apply or spray only 1 trip along the wood Leave to dry completely 15 - 20 minutes.
2. rubbed sandpaper to be smooth.
3. applied with top colors such as Wood Tech Hybrid-WoodCard (According to the process of paint over that page)

additional recommendations

• Shared products. Wood Tech Tinner WT-500 for diluted with 2 in 1 herotch. D -primer

Note: The color of the product displayed on the website may be different from the color display settings of each screen