Hybrid Wood Guard WOODTECT Quick Primer WW-5103 Size 1 Gallon Walnut

• Rubber oil and fill in the burr in the body. Beautiful smooth wood.
• Fast film No need to use a chat No need to hit the dough.
• Dry quickly, can be applied in 15-20 minutes.
• Add adhesion. Fighting colors.
• Transparent, translucent, wood showing the most clear wood.
• Size 1 gallon
• Walnut color

Technical Information

• Color Film type: Clear color (xoline formula)
• Gallon/Tourism: 25 - 30 sq.m.
• Number of trips: 1 trip.
• Dil together: Can be used immediately if it is a hardwood. Mix 20% with Tinne. WT -500 or Tinner 9951 (Do not mix with pine oil)
• Dry. Experience: 5 - 10 minutes
• Dry: 15-20 minutes

How to use

Surface preparation

• New surfaces and old surfaces That needs to be applied, must dry, clean, free from fat stains. dust (The surface moisture must not exceed 14%)
• Old color film that is dust or peeling Must scrub the old or peel off all the wood.
• If the surface has fungal Eliminate all the fungus. Then rinse with clean water Leaving completely dry (The surface moisture must not exceed 14%)
• Stroking sandpaper to smooth the skin Clean thoroughly without dust to apply the floor.
• When the surface is well prepared Will increase the adhesion to the film over the top And get the highest color efficiency.

Steps

1. After preparing the surface and the surface is clean, dry, without stains. Dustless fat.
2. Let Wood Tech people Hybrid-Primer WW-5103 well, both before and during the application. (If the wood is hard, mix 20% with the WT-500 or 2951) (do not mix with the oil is absolutely).
3. Apply or spray only 1 trip according to the wood. Leaving to dry 15 - 20 minutes.
4. Sandbold sandpaper, smooth skin. (According to the process of paint over that page)

Additional recommendations

• Shared products Wood Tech Tinner WT -500 for diluted with 2 in 1 hero. Rustech or with hybrid foundation - primer

> Note: The color of the product displayed on the website may be different from the color display settings of each screen.