Asphalt DR.FIXIT Pidijoint 6690 Size 12 KG.

• Rubber, hot concrete road Good flow formula.
• Made from asylia rubber, synthetic rubber, resin and quality additives.
• It has properties to prevent water to seep into the concrete road boundary.
• Concrete island. Good. Prevent water, seep into the surface, resistant to the flood, flood, do not slip.
• Highly flexible. Supports the expansion or contraction of concrete grooves.
• Not greasy, even hot weather. Endure the temperature up to 90 degrees Celsius.
• Easy to melt Good flow Get more volume.
• Pouring points at low temperatures Does not contain oil that is used as a solution.
• has been certified according to the TIS. 479-2541/ASTM D6690
• Passed the Department of Highways Standards
• size 12 kg/box

usage rate

• Continued traces: (x L) 10 x 20 Mm
• The amount of use per groove is 1 meter. 0.21 kg.
• The length that can drop per 1 box of 57 meters

How to use

1. Preparation or joints There is no fragments that can easily come off, dust, oil stains, waxing liquid, concrete, skin that falls or cracks. Must be repaired with appropriate materials such as cement repairing the structure And leave to dry Before working in the next step.
2. The flooring
   • For good adhesion should be applied with foundation. SELLOL BONSER MER Leave it to dry before dropping rubber.
3. Working
   • Bring Dr. Ficit Pidiot 6690 with plastic sheets. Covered (No need to remove the plastic wrapped out Because the plastic will dissolve into homogeneity as the product) Put in a melted pot with an intermediary transmits heat.
   • While melt Should bother to be homogeneous Control the temperature of the oil used to cast more than 240 degrees Celsius and the temperature of the rubber drops 180 degrees Celsius
   • People give the rubber to dissolve consistently.
   • Drop Dr. Fiksit Pidiot 6690 that is melted into homogeneous and then in the concrete should be used in 2-3 hours.
   • Discard. Dry 4-5 hours. Before activation

Additional recommendations

• If the fire occurs, use dried chemical powder, carbon dioxide or sand. Do not use water to put out the fire.
• In the event that the rubber is splashed into the skin, use cold water to pour the area. And immediately consulted the doctor. Because the water will boil and the rubber drops the grooves will bounce off. Strong> Note : The color of the product shown on the website There may be different from the color display settings of each screen.