FOCUS FILM Mirror Film (SM-50(2M), 100 x 200 cm., Grey Color

• Gray window film Can protect from sunlight. 51% can see the view of the outside atmosphere without hurting the eyes.
• 49% of sunlight can pass through without turning on the lights. The room is still bright. Doesn't make the inside of the house dark (Visible Light Transmittance)
• Protects against heat from sunlight 23% (Total Solar Energy Rejected)
• Protects against UV light (Ultraviolet Rejected) by 99%.
• Protects against infrared light (Infrared Rejected) 10%
• Heat waves can pass through the glass 77% (Solar Heat gain Coefficient)
• Ability to absorb light 41% (Visible Light Absorptance)
• Ability to reflect light 9% (Visible Light Reflected)
• Shading Coefficient 0.88
• Film thickness 36 microns (1 mil.)
• Film size (W x H) 1 x 2 meters

Steps for installing window tint film

1. Prepare equipment for installation such as a water sprayer, sticker iron, and cutter.
2. Clean the glass thoroughly. Free from dust stains
3. Peel off about 10 cm of the clear plastic behind the film and spray it with water to keep it wet.
4. Spray water on the area of the glass that you want to install to make it soaked.
5. Lift the film and place it on the glass. Aim in line.
6. Pull off all of the clear plastic on the back. (When pulling it out, it is recommended to spray water with it every time)
7. During the film installation If the film is dry, more water should be sprayed. To be able to move the film
8. Spray water in front of the film. Then iron from the center out to the sides.
9. Use a sharp cutter to cut off the excess.
10. The end of the film can be inserted into the silicone frame of the door-window frame.

Additional recommendations

• The film can be removed from clear plastic using masking tape. Tape the front and back tightly, then separate.
• Film with an intensity of 50-80% can be viewed from the outside.

Note: Product colors shown on the website There may be differences from the color display settings of each screen.