Center for home products and construction materials for Thais
logo_mobile
search
Select Store
Image 1
Image 2
Image 3
Image 4

Acrylic Coating Paint Gloss 1 Gallon JBP W-100 Clear

Waterproofing sealant Produced from 100% acrylic resin, special quality, clear color, small molecules can penetrate the surface better than general varnish and provide excellent adhesion. The color film has high gloss, non-yellowing, prevents moisture, fungus, algae, resistant to water, alkalis, various chemicals, and excellent resistance to weather conditions and UV light. can prevent seeping, can be used both internally and externally Suitable for surface coating on many types of materials such as sandstone, cladding stone, washed stone, washed sand, natural stone, exposed bricks, terracotta tiles. earthenware concrete wall Flat tiles, wood and artificial wood (fiber cement)
SKU : 60359118
Product Position :
Row034AShelf010
Share :
฿529 /EACH
529 /EACH
theone
You will receive points
Wishlist
compareCompare
location pin blue
Check stock at store

About the Product

Product Details

  • The waterproofing JBP coating can be used both externally and internally.
  • Can be used on sandstone, cladding stone, washed stone, washed sand, natural stone, bricks, pottery tiles. Flat tiles, concrete, wood and artificial wood (fiber cement)
  • Made from 100% real acrylic polymer, high quality.
  • Provides excellent adhesion properties Resistant to weather and UV light
  • The film texture is strong, shiny, not yellowing.
  • Prevent water and stains from entering the surface well.
  • Prevent mold and algae growth on the surface.
  • Prevent the embedding of dust on the surface.
  • Resistant to water, alkalis, various chemicals
  • Extend the service life of the surface for a longer time.
  • Can be activated immediately, no mixing required.
  • Size: 1 Gallon
  • Clear  

Technical data

  • Color film characteristics: clear gloss
  • Solid by volume : 37+/-2
  • Dry time (at 25°C)
    • Dry to the touch: 1-2 hours
    • Dry before recoating: 4-6 hours
    • Can dry: 24 hours
  • Flash point : > 30 °C

Surface preparation

  • New cement surface
    • The surface must be dry, clean, free from dust, dirt, grease and allowed to dry completely.
  • Old cement surface
    • Moldy surface or moss Must be scrubbed, washed off and applied with fungicide and algae, JBP Moldwash to be soaked, 1 coat and left to dry for at least 3 hours without rinsing. and then coat with W-100 waterproofing sealant
    • If the old paint is applied to the original surface Remove all old paint first and then apply W-100 waterproofing sealant to coat the material surface to shine.

Additional recommendations

  • Store the product in a dry place. well ventilated Close the lid tightly and tightly at all times.
  • Should not be stored in a hot place and out of direct sunlight.
  • Should be done in a well ventilated place.
  • Try to avoid touching the skin or inhaling it.
  • If it gets on your skin, you should wash it off with soap and water immediately. If it gets into your eyes, rinse with clean water immediately and seek medical attention.

Remark : The color of the product displayed on the website may There is a difference from the color display settings of each screen.

Product Specifications

Size for Delivery

Product Size (cm)
(W)8 x (L)28 x (H)18
Weight (kg)
4
How do you find the product information?
Related Products