BOSNY Acrylic Water Seal A100 (B263), Size 1 L., Clear

• Liquid for applying varnish and waterproofing. (Acrylic formula)
• Can be applied to waterproof well. For materials such as exposed brick, exposed brick, sandstone, natural stone, cement walls, concrete, wood, tiles, gypsum, and porous materials.
• Can be used as a building primer before topcoat or as a topcoat on plastic water-based paint. To protect against dirt, weather and UV light.
• Helps protect materials from moisture, rain, sunlight, and various dirt.
• Clear type, ready mixed No need to mix thinner.
• Size 1 liter
• clear color
• Technical information
• Area coverage: 8 - 10 sq m./liter/trip
• Tool type: brush, roller, sprayer
• Mixing before use: Can be used immediately without mixing.
• Drying time: 2 - 4 hours.
• Amount of use: 1 gallon of Bosny Acrylic Waterseal can be used in an area of approximately 40 square meters.

How to use

• Clean the surface thoroughly and dry it. Free from dust or various impurities.
• Apply a thin layer of Bosny Acrylic Waterseal waterproofing solution in several layers all over the material.
• After it is completely dry Recommended to apply 1 more time within 1 hour.
• Usage: Apply 2 coats of clear waterproof varnish. You should allow the paint film to dry for at least 2 - 4 hours before applying the next layer.

Additional recommendations

• Shelf life 3 years from the date of production. (for gallons that have not yet been opened)
• Close the lid tightly and keep out of the reach of children. Far from water sources
• Use under appropriate conditions There is adequate ventilation.
• Don't inhale.
• Avoid direct skin contact. If there are exposed parts, wash them with soap and water.
• If it comes into contact with your eyes, rinse with plenty of water and seek medical attention immediately.

Note : Product colors shown on the website. There may be differences from the color display settings of each screen.