Concrete Cleaner & Protect BESBOND GBC001AM00I Size 5 L. Clear

• For coating waterproof materials Can be used for both internal and external work. both floor and wall
• Can penetrate deeply, dries quickly, no pungent odor.
• High water protection performance
• Prevents mold and algae, prevents embedded dust, making it easy to clean.
• After coating, the surface remains unchanged.
• Suitable for surfaces with high porosity or high water absorption surfaces such as
  
  • Clay bricks, lightweight bricks, exposed bricks
  • sandstone, washed gravel, washed sand
  • Concrete, unpolished bare cement and fiber cement.
• Size 5 liters
• clear color

Usage rate

• 1 liter / 30-50 sq m. (depending on the nature of the surface)

How to use

• In the case of using with old stone To eliminate mold and algae By applying or pouring the solution all over the area where the mold or algae is. Then let it dry. When the fungus and algae dry up, it will turn into a black dry stain. Then scrub and clean it
• completely. then let it dry and to prevent the occurrence of mold and algae again You should reapply the solution and let it dry without washing off.
• In the case of using with new stone To prevent mold and algae After installation, the area to be protected must be dry and clean. Free from various impurities so that the solution can be applied directly to the surface. Apply the fungus and algae remover and
• protection solution all over the area and let it dry without washing off. Leave for 2-3 hours before painting as desired.

Additional recommendations

• Personal protective equipment should be used while working, such as glasses, gloves, and masks.
• In case of contact with eyes, rinse with clean water several times immediately and see a doctor.
• Should be stored in a shaded and dry place. Good ventilation

Note: Product colors shown on the website There may be differences from the color display settings of each screen.