Tile Grout JORAKAY TURBO PLUS Size 0.5 kg Clay

Quantity Sqm. Continued at 0.5 kg (0.5 mm groove size)

• 60 x 120 cm tiles, average 10 mm, get an area 43 & nbsp. ; Sq.
• 80 x 80 cm tiles, an average of 10 mm, get an area 43 Mm
• Tiles 60 x 60 cm. Average thick 10 mm. Get an area 32 M.R.
• Tiles 40 x 40 cm thick, an average of 10 mm. /UL>

  How to use

  Surface preparation

  To be free from dust, dirt, scrap material, not to have water before the drug.

Mixture ratio

Floor work

• Size 0.2 - 1.0 mm.
  • 0.5 kg of medication per 0.165 liters of water or
  • 3 parts glue to 1 part of the water by volume
  • The size of a 2 - 5 mm.
    • 0.5 kg per 0.15 liters of water or
    • 3.5 parts per water 1 section by volume

  Wall work

  • Size 0.2 - 1.0 mm.
    • 0.5 kg of drug glue per 0.15 liters of water or
    • 3.5 parts glue Water 1 part by volume
  • Size 2 - 5 mm. >
  • Glue 3.8 parts per 1 part of the water by volume

Mixing

• In the water While turning on a low -rpm mixer or stirring well.
• Should use all the types of pills within 20 minutes.
• When the thick sticky drug glue Due to leave for too long or too long Do not add water to liquid. Should be poured and mixed again.

Operation

1. Use a good -mixed rubber tire. By making an oblique angle to the groove so that the rubber is not to pull the drug out of the groove Use as much as possible from the face of the tiles. Then use a cloth or a sponge moistened with water and wipe clean Then use a dry cloth to wipe the face again.

Cooking and Tile Pharmaceutical

• The first 6 hours should use sticky paper. (Brown paper used to make bags or wrapping) to help glue the pills slowly and help prevent dust or other dirt. To the island on the surface glue that is not dry.
• Should not use plastic or newspaper instead of sticky paper.

Cleaning

• After 2 days, the tile surface should be cleaned again. In order to let the glue that may remain out of the tile surface.
• Use soapy water mixed with warm water over Leave for a while Therefore wipe clean.
• Do not use concentrated solutions or acids. Because it will be corroded, glue the genre to slip out and may change the color of the drug glue. But should test in a small area first.
• The use of polishing solutions or washing various stains should be done after the perfect grudge glue. Which must not be less than 30 days and should be tested in a small area first.

Additional recommendations

• Drug width The line must not exceed 0.2 - 5 mm.
• The depth of the groove should not be less than 2/3 of the thickness. Tiles
• The drug must be done later 48 hours. Or after a complete range of cement.
• Should not be used with areas that are exposed to acids all the time.
• Cements may cause skin irritation. Should use safety protective equipment such as gloves, dust mask or glasses
• In the case of entering the eye Wash the eyes with clean water many times immediately and quickly consult a doctor.
• If correct or touching the face Use water and cleaning soap.
• Should be kept out of the child's hand.

Storage

• Should be stored in umbrella With convenient ventilation The area must be dry, not moist because the product is not deteriorated.
• The age of the product 1 year from the date of production. In the condition not yet open (If not all use, the bag must be tightly tightly tied every time There may be different from the color display settings of each screen.