Tile Grout Premium Plus JORAKAY No.0772 Size 1 kg Grey

• Ceramic tiles
• have a mixture of Portland cement. Special efficiency and color additives
• Inhibit black mold with microbans
• Reduce stains, buried with hydrophobic
• High, not cracked, not cracked with lasex polymer
• suitable for interior and outside the building.
• The American standards ANSI ASI 118.6 (UNSAND), ANSI A 118.7 (UNSANDED)
• Size 1 - 7 mm.
• Size 1 kg
• Natural gray

quantity Sqm that has been per 1 kg (2 mm) ^*

• Tile size 60 x 60 cm, average 8 Mm, get an area of ??20 sqm
• Tiles 50 x 50 cm, average 8 mm, get an area 16 sqm
• tiles Size 45 x 45 cm, average 8 mm, get an area 15 sqm.
• Tiles 40 x 40 cm, an average 8 mm. M.
• 30 x 30 cm tiles, an average 8 mm, get an area 8 sqm
• Tiles 30 x 60 cm, an average thick 8 MM. Get an area of ??12 sqm.
• Tiles 30 x 45 cm thick, an average of 8 mm, get an area 11 Average 25 x 40 cm tiles, an average of 8 mm, get an area of ??6 sq.m.
• Tiles of 20 x 30 cm, average 8 mm, get an area 6 M.
• Tiles 20 x 25 cm, an average of 8 mm, get an area of ??5 sqm

How to use Work

Surface preparation

• Clean the pills, free from dust, dirt, scrap materials to not have water. Imprisoned before the drug

Mixture ratio

• 1 kg (1 bag) per 0.33 - 0.35 liters of water or
• 3 - 3.5 parts of the water per 1 part by volume.

Mixing

• Term medicine in the water While turning on a low -rpm mixer or stirring well.
• Leave for about 5 minute for chemistry to cultivate. And stir again before using While using it, it should be disturbed.
• When the thick sticky drug glue Due to leave for too long Or use too long Do not add water to liquid. Should be poured and mixed again.

Operation

1. Use a good -mixed rubber tire. By making an oblique angle to the groove so that the rubber is not to pull the drug out of the groove Use as much as possible from the face of the tiles. Then use a cloth or a sponge moistened with water and twist. Then use a dry cloth to wipe the face again.

The correct incubation instructions

• The first 72 hours should use sticky paper. (Brown paper used to make bags or wrapping) to help glue the pill, slowly incubate and help prevent dust or other dirt on the surface of the glue that is not dry.
• Should not use plastic or newspaper instead of sticky paper.

Cleaning

• After 10 days, the tile surface should be cleaned again. In order to let the glue that may remain out of the tile surface By using soapy water mixed with warm water to pour all over Leave for a while Therefore wipe clean.
• Do not use concentrated solutions or acids. Because it will be corroded the drug and may cause the color of the drug to change.
• If necessary, use diluted acid to clean But should test in a small area first.
• The use of polishing solutions or washing various stains should be done after the perfect grudge glue. Which must not be less than 30 days and should be tested in a small area first.

Additional recommendations

• Drug width The line must not exceed 7 mm. The depth of the groove should not be less than 2/3 of tile thickness.
• The drug must be done after 48 hours or after the cement incubation. Li>
• Cement may cause skin irritation. Should use safety protective equipment such as gloves, dust mask glasses For example,
• If you get in your eyes Wash the eyes with clean water many times immediately and quickly consult a doctor.
• If correct or touching the face Use water and cleaning soap.
• Should be kept out of the child's hand

Note

• ^{* Average amount of usage Actual use may be different, depending on other factors in use, such as the expertise of the mechanic. Equipment that is shared (The number of the trolling that is used to cut the tiles) The mixing rate of users For example,}
• The color of the product shown on the website may be different from the color display settings of each screen.