Grout for Glass Block JORAKAY No. 0910 Pearl White

• Glass glue for glass blocks and terracotta tiles
• Inhibit the occurrence of black mold with microbans
• Reduce the accumulation of stains, buried tightly
• Extra Bond Providing high adhesion force Excellent island Does not come off. .
• The American standard ANSI A 118.6 (SANDED), A 118.7 (SANDED)
• Type 1 kg per blog, glass 6 pieces (19 x 8 glass blocks x 19 cm)
• White pearl white

How to use

Surface preparation

• Clean the pills without dust, dirt, scrap material, not to have water before the drug. >
• 1 kg glass block (1 bag) per 0.25 liters of water or
• 3 parts glass blocks per 1 part of the water by volume

• Term Yaena in the water While turning on a low -rpm mixer or stir well.
• Leave for 5 minutes to make the chemistry incubate. And stir again before using While using it, it should be disturbed.
• When the thick sticky drug glue is too long or too long Do not add water to liquid. Should be poured and mixed again.

Operation

1. Use a good -mixed rubber tire. By making an oblique angle to the groove so that the rubber is not to pull the drug out of the groove Use as much as possible from the face of the tiles. Then use a cloth or a sponge moistened with water and wipe clean Then use a dry cloth to wipe the face again.

Cooking and Tile Pharmaceutical

• The first 72 hours should use sticky paper. (Brown paper used to make bags or wrapping) to help glue the pills slowly and help prevent dust or other dirt. To the island on the surface glue that is not dry.
• Should not use plastic or newspaper instead of sticky paper.

Cleaning

• After 10 days, the tile surface should be cleaned again so that the glue of the drug that may remain out of the tile surface. By using soapy water mixed with warm water to pour all over Leave for a while Therefore wipe clean.
• Do not use concentrated solutions or acids to clean. Because it will be corroded and may cause the color of the drug to change. But should test in a small area first.
• The use of polishing solutions or washing various stains should be done after the perfect grudge glue. Which must not be less than 30 days and should be tested in a small area first.

Using recommendations

• The width of the groove must not exceed 8 - 15 mm. The depth of the groove should not be less than 2/3 of tile thickness.
• The drug must be done after 48 hours or after the cement cultivation.

Caution

• Should not be used with an area that is exposed to acids all the time.
• Cement may cause skin irritation. Should use safety protective equipment such as gloves, dust mask Glasses
• In the case of entering the eye Wash the eyes with clean water many times immediately and quickly consult a doctor.
• If correct or touching the face Use water and cleaning soap.
• Should be kept out of the child's hand.

Storage

• Should be stored in umbrella With convenient ventilation The area must be dry, not moist because the product is not deteriorated.
• 1 year old product from the date of production. In the condition not yet open (If not all use, the bag must be tightly tightly tied every time)

Note

• ^{* Average amount of usage Actual use may be different, depending on other factors in use, such as the expertise of the mechanic. Equipment that is shared (The number of the trolling that is used to cut the tiles) The mixing rate of users For example,}
• The color of the product shown on the website may be different from the color display settings of each screen.